1) Wire connector including: UY connector, UY2 connector UY2 butt connector (TP-1310-UY2) the small size of the UY2 connector reduces the splicing bundle O.D. The connector’s two ports accept two solid or stranded copper conductors. The connector is filled with a sealant to provide moisture resistance.It is employs an insulation displacement contact (IDC) so that stripping of the conductor insulation prior to installation is not required,and easily installed and crimped using any of the connector crimping tools (TP-5931-311). It is applied to telephone wiring connection. The butt connector is designed for 0.4mm-0.9mm solid copper cables with max insulation diameters 2.08mm. The connector is filled with a moisture resistant compound in order to provide moisture proof connections.The connector can provide total environmental sealing around IDC-contacts.
2) Wire connector including: 314 self-stripping electrical connector 314 self-stripping electrical connector (TP-1310-314) is grease filled, protecting against corrosion in damp conditions. Handles 22-14 AWG solid or stranded wire. Self-stripping U contacts for mechanical strength and electrical conductivity. It is recommended to use the crimping tool (TP-5940-998).
3) Wire connector including: UDW2 dropwire inline connector UDW2 dropwire inline connector (TP-1310-UDW2) is a full pair moisture-resistant dropwire connector especially designed for 16 - 19 AWG (1.3 mm - 0.9 mm) copper or copper clad steel conductors with insulation diameters up to .175" (4.4 mm) O.D. A sealed moisture resistant, one pair inline aerial dropwire connector for copper or steel conductors, the inline connector is for mid-span splices where strain-relief is provided. The connector can provide total environmental sealing around IDC-contacts. It is recommended to use the crimping tool TP-5940-998.
4) Wire connector including: UR2 butt connector UR2 butt connector (TP-1310-UR2) the small size of the UR2 connector reduces the splicing bundle O.D. The connector’s three ports accept three solid or stranded copper conductors. The connector is filled with a sealant to provide moisture resistance.It is employs an insulation displacement contact (IDC) so that stripping of the conductor insulation prior to installation is not required,and easily installed and crimped using any of the connector crimping tools (TP-5931-311). It is applied to telephone wiring connection. The butt connector is designed for 0.4mm-0.9mm solid copper cables with max insulation diameters 2.08mm. The connector is filled with a moisture resistant compound in order to provide moisture proof connections.The connector can provide total environmental sealing around IDC-contacts.
5) Wire connector including: TL1 self-stripping electrical connector TL1 self-stripping electrical connector (TP-1310-TL1) is grease filled, protecting against corrosion in damp conditions. Handles 1.0-1.35mm solid or stranded wire. Self-stripping U contacts for mechanical strength and electrical conductivity. It is recommended to use the crimping tool (TP-5940-998).
6) Wire connector including: 951, 952, 953 Self-Stripping Electrical Tap Connectors Self-Stripping Electrical Tap Connectors (TP-1310-951,952,953) to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a 6.35mm male tab, making a reusable quick-connect wiring termination.
412 compact electrical splicing connector (TP-1310-412,413,415) is compact splicing connector; 2-conductor/3-connector/5-connector terminal block, with operating levers, max. continuous service temperature 85°C . Handles 28-12 AWG solid or stranded wire for mechanical strength and electrical conductivity.