1) LSA Module Accessory including : Back mount frame 10 pairs back mount frame 10 ways (TP-1212-10-10) is used as to install the LSA modules, with the function of wiring. It is usually mounted onto the back plate in the Main Distribution Frame (MDF) or Cross Connection Cabinet (CCC) or just installed into the Distribution Point Boxes (DP). It belongs to the accessories for the copper connectivity.
2) LSA Module Accessory including : Module label holder 10 pairs module label holder for LSA profile mounting rack (TP-1213-10P) is mounted on the profile mounting rack for LSA Module for the labelling. It is inclusive a cardboard label. It occupies one module position.
3)LSA Module Accessory including : Earth bar 10 pairs earth bar for LSA module (TP-1242-10) is used on the LSA disconnection module, and 1 pair protectors are used mounted onto the earth bar for against over-voltage and over-current protection. There are 2 types of LSA disconnection module. One is non-profile type, by mouting the earth bar onto the non-profile module, and mouting the module to the back mount frame, the earth bar will collide into the back mount frame for earthing. The other is profile type LSA disconnection module, mouting the earth bar and 2pcs earth clips onto the module, and mount onto the profile rod for earthing.
4) LSA Module Accessory including : Earth clip Earth clip for LSA profile module (TP-1243) is used on the LSA profile disconnection module, together with 10 pairs earth bar to form the earthing system, and 1 pair protectors are used mounted onto the earth bar for against over-voltage and over-current protection. Each 10 pairs LSA profile module is equipped with 2 pieces of earth clip.
5) LSA Module Accessory including : Test cord 2-pole test cord LSA test plug to banana plug (TP-1220-2TB) is used for testing the telephone line. The LSA plug is used for inserting into the LSA module, and the banana plug for connecting to the telephone testing kit. The grey 2-pole cord permits parallel connection (monitor function) when it is used in the connection or disconnection module. The contacts of the cord bridge the centre contacts of the module which permit monitoring of the line (connection line). 2-pole cords cannot be used in switching modules. The metal contacts would not make a positive contact in this case.